Lavender Lace Heart Crochet Bedspread Pattern
Beginner Friendly
Perfect for those just starting their crochet journey, with clear instructions and simple techniques
Single-Day Project
A satisfying project you can complete in a single afternoon or evening.
Handmade Gift
A beautiful keepsake — free forever. Read online or print at home.
About This Lavender Lace Heart Crochet Bedspread Pattern
This crochet heart bedspread pattern is built from lace heart motifs. Each heart starts as a round lavender doily, gets shaped into a heart by a deep purple frame worked in graded stitch heights, and finishes with a scalloped picot edge. The heart shape comes from the stitches themselves rather than from sewing or stiffening, so every motif lies flat and stays crisp. The hearts are joined as you go, and small star motifs fill the gaps where four hearts meet, which gives the whole bedspread its open, airy lattice.
This is a long project. Each heart takes about one and a half to two hours once you know the rounds. The queen size uses 90 hearts and 72 fillers, so plan on roughly 180 to 220 hours in total. The upside is that it is completely portable: you are only ever carrying one motif and a small ball of each color.
The pattern suits confident crocheters who are comfortable with tall stitches, careful stitch counting and join-as-you-go techniques. If you have made a doily or a motif blanket before, you will be fine. If you want to try the design before committing to a full bedspread, a single heart makes a lovely coaster or a sachet front, and a 30-heart throw is a manageable first step.
Materials
- DK / light (#3) mercerized cotton, Color A, lavender about 3,000 g (approx. 60 x 50 g balls) for queen size
- DK / light (#3) mercerized cotton, Color B, deep purple about 850 g (approx. 18 x 50 g balls) for queen size
- 3.5 mm crochet hook
- Locking stitch markers at least 4
- Tapestry needle
- Blocking mats and rust-proof pins or a large towel on a carpet
- Spray bottle
- Scissors
Abbreviations
MRmagic ringchchainsl stslip stitchscsingle crochethdchalf double crochetdcdouble crochettrtreble crochet (yarn over twice)dtrdouble treble crochet (yarn over three times)sc3togsingle crochet 3 togetherpicotch 3, sl st in 3rd ch from hooksp(s)space(s)st(s)stitch(es)begbeginningHeart Motif, Part 1: Lace Center (Color A)
- Round 1: With A, make a MR. Ch 3 (counts as dc), 15 dc in ring, sl st to top of beg ch-3. Pull the ring tight. (16 dc)
- Round 2: Ch 5 (counts as dc + ch 2). *Dc in next dc, ch 2* 15 times. Sl st to 3rd ch of beg ch-5. (16 dc, 16 ch-2 sps)
- Round 3: Sl st into first ch-2 sp, ch 3 (counts as dc), 2 dc in same sp, ch 1. *3 dc in next ch-2 sp, ch 1* 15 times. Sl st to top of beg ch-3. (48 dc in 16 groups, 16 ch-1 sps)
- Round 4: Sl st in next 2 dc and into the ch-1 sp, ch 1, sc in same sp, ch 5. *Sc in next ch-1 sp, ch 5* 15 times. Sl st to first sc. (16 sc, 16 ch-5 loops)
- Round 5: Sl st into first ch-5 loop, ch 3 (counts as dc), (2 dc, ch 2, 3 dc) in same loop. *(3 dc, ch 2, 3 dc) in next ch-5 loop* 15 times. Sl st to top of beg ch-3. (16 shells)
- Round 6: Sl st in next 2 dc and into the ch-2 sp, ch 1, sc in same sp, ch 7. *Sc in next ch-2 sp, ch 7* 15 times. Sl st to first sc. (16 sc, 16 ch-7 loops)
- Round 7: Sl st into first ch-7 loop, ch 1, 9 sc in each ch-7 loop around. Sl st to first sc. Fasten off A. (144 sc)
- Marking: Lay the circle flat and choose any sc as the bottom point. Mark it as st 1. Count 72 sts onward from it and mark the next stitch, st 73, as the top dip. There should be 71 unmarked sts on each side between the two markers. These markers control the whole heart shape, so check them twice.
Heart Motif, Part 2: Purple Shaping Frame (Color B)
- Round 8, point: Join B in st 1. Ch 5 (counts as dtr), ch 3, dtr in same st. This forms the point and its ch-3 sp.
- Round 8, first side, working from point toward dip: tr in next 6 sts, dc in next 18 sts, then for the lobe *tr in next st, 2 tr in next st* 15 times (45 tr), dc in next 10 sts, hdc in next 5 sts, sc in next 2 sts. You should now be at the marked dip.
- Round 8, dip: Sl st in st 73. This sl st is not counted as a stitch.
- Round 8, second side, working from dip toward point: sc in next 2 sts, hdc in next 5 sts, dc in next 10 sts, then for the lobe *2 tr in next st, tr in next st* 15 times (45 tr), dc in next 18 sts, tr in next 6 sts. Sl st to top of beg ch-5. (174 sts plus the point ch-3 sp; each side has 86 sts plus its point dtr)
- Round 9: Sl st into the point ch-3 sp, ch 1, (2 sc, ch 2, 2 sc) in same sp. Sc in next 85 sts (the dtr through the last hdc). Sc in next sc, sc3tog over the next sc, the dip sl st and the following sc, sc in next sc. Sc in next 85 sts. Sl st to first sc. Fasten off B. (177 sc: 88 on each side plus the sc3tog at the dip, and a ch-2 sp at the point)
Heart Motif, Part 3: Scalloped Picot Edging (Color A)
- Round 10: Join A in the point ch-2 sp, ch 1, (sc, ch 5, sc) in same sp. *Ch 3, skip 1 st, sc in next st* 44 times; the last sc lands in the sc just before the sc3tog. Ch 3, skip the sc3tog, sc in next st. *Ch 3, skip 1 st, sc in next st* 43 times. Ch 3, skip last st, sl st to first sc. (90 sc, 89 ch-3 loops, 1 ch-5 point loop; 44 loops on each side plus one centered dip loop)
- Round 11: Sl st into the ch-5 point loop, ch 3 (counts as dc), (2 dc, ch 3, 3 dc) in same loop. *Sc in next ch-3 loop, (3 dc, picot, 3 dc) in next ch-3 loop* 22 times. Sc in the dip loop. *(3 dc, picot, 3 dc) in next ch-3 loop, sc in next ch-3 loop* 22 times. Sl st to top of beg ch-3. Fasten off. (1 point shell, 44 picot shells, 45 sc)
- Shell numbering for joining: on each side, number the picot shells 1 to 22 starting from the point, so shell 1 is next to the point and shell 22 is next to the dip.
- Make the first heart completely. Every following heart is made through Round 10, then joined to its neighbors while you work Round 11, as described in the next section.
Joining the Hearts (Join As You Go)
- Layout: Arrange the hearts in a grid of 9 hearts across and 10 down, all upright with points facing the foot of the bed. Join them row by row, working left to right.
- Picot join: To join a shell to a finished heart, replace its picot with: ch 1, sl st into the matching picot of the finished heart, ch 1, sl st in first ch.
- Side joins: Join picot shells 11, 12, 13 and 14 on the side that touches the heart to the left. Join shell 11 to that heart’s shell 11, shell 12 to its shell 12, and so on.
- Top join: From the second row onward, work the dip of Round 11 as follows instead of the single sc: (sc, ch 3, sl st into the point ch-3 sp of the heart directly above, ch 3, sc) in the dip loop. This adds one sc to joined hearts, which is expected.
- Leave all other picots free. The fillers in the next section join to some of them.
Filler Star Motifs (Color A)
- Placement: Make one filler for every gap where four hearts meet. That is 72 fillers for the 9 x 10 layout.
- Round 1: With A, make a MR. Ch 1, 8 sc in ring, sl st to first sc. (8 sc)
- Round 2: Ch 1, sc in same st, ch 3. *Sc in next sc, ch 3* 7 times. Sl st to first sc. (8 sc, 8 ch-3 sps)
- Round 3: Sl st into first ch-3 sp, ch 3 (counts as dc), (dc, ch 2, 2 dc) in same sp. *(2 dc, ch 2, 2 dc) in next ch-3 sp* 7 times. Sl st to top of beg ch-3. (8 shells)
- Round 4 (joining round): Sl st in next dc and into the ch-2 sp, ch 1, sc in same sp. *Ch 4, sl st into the next designated heart picot, ch 4, sc in next ch-2 sp* 7 times. Ch 4, sl st into the last designated picot, ch 4, sl st to first sc. Fasten off.
- Designated picots, working clockwise around the gap (2 per heart):
- Upper-left heart: shells 6 and 3 on its right side.
- Upper-right heart: shells 3 and 6 on its left side.
- Lower-right heart: shells 20 and 17 on its left side.
- Lower-left heart: shells 17 and 20 on its right side.
Border (Color A)
- Round 1: Join A to any free picot on the outer edge of the joined hearts. Ch 1, sc in same picot. Then work *ch 5, sc in next free picot* along each heart’s outer edge, with these exceptions:
- To cross the gap between two edge hearts, ch 9 instead of ch 5.
- On the outermost picot of each of the 4 corner hearts, work (sc, ch 5, sc).
- Round 2: Sl st into first loop, ch 1. Work (3 sc, picot, 3 sc) in each ch-5 loop and (5 sc, picot, 5 sc) in each ch-9 loop around. Sl st to first sc. Fasten off and weave in the end.
Finishing
Weave in every end as you finish each motif. Do not save them for the end: there are more than 500 ends in this bedspread, and weaving them later is much harder than doing a few at a time. When you weave, run each end back through stitches of its own color so no purple shows in the lavender and no lavender shows in the purple.
Block the bedspread in sections. Lay one area flat on blocking mats or towels and spray it until it is damp through. Pin each heart point first, then each dip, then each lobe curve, so the hearts sit square in the grid. Pin out the picots and the filler arms last. Let each section dry completely before you move on to the next. Cotton holds a blocked shape well, so the lace will stay open after washing. A light re-block after each wash brings the points back to full crispness.
Tips for Success
- Keep the bottom-point and top-dip markers in Round 7 until Round 8 is finished. Every graded stitch height in the frame depends on starting at the right place.
- Count the lobe increases in Round 8 out loud in pairs (“one, two-in-one”). That section is where most miscounts happen.
- Work the purple tr and dtr stitches with a slightly looser tension than your sc. This lets the frame lie flat instead of pulling the heart into a bowl shape.
- Make the hearts in batches of 10, then join a full row at once. This keeps your tension and blocked size consistent across the bedspread.
- Buy all the yarn for each color in a single dye lot. Lavender in particular shifts noticeably between lots.
Common Mistakes to Avoid
- Lopsided heart. If one lobe is bigger, the dip marker was placed off-center. Recount Round 7 so there are exactly 71 sts on each side between the two markers.
- Frame that cups or curls. This means your Round 8 tension is too tight. Go up half a hook size for Rounds 8 and 9 only.
- Ruffled or wavy lobes. This usually means extra increases in the lobe. Each lobe should end with exactly 45 tr, so check the count before you fasten off B.
- Puckered joins. If a seam puckers, you joined to the wrong shell. Pull back to the join and match shell numbers exactly, so 11 joins to 11 and 12 joins to 12.
- Skipping blocking. An unblocked spread looks rumpled, with soft points and sagging picots. Blocking is part of the pattern, not an optional extra.
Ways to Customize This Pattern
- Throw size: Join 5 hearts across and 6 down for a throw of about 125 x 145 cm. This uses 30 hearts and 20 fillers.
- Two-tone reversal: Work the lace center in deep purple and the frame in lavender for a darker, moodier version.
- Valentine colorway: Use blush pink for Color A and crimson for Color B. Change nothing else.
- Table runner: Join a single row of 5 hearts and add the border on all sides.
- Matching cushion: Join 4 hearts in a 2 x 2 square with one filler in the center, then sew it onto a lavender velvet cushion cover.
Frequently asked questions
You can, but mercerized cotton is strongly recommended. Acrylic does not hold blocked heart points and open lace well, so the hearts will soften and lose their shape over time. If you do use acrylic, choose a DK weight and steam block it rather than wet blocking.
Each blocked heart adds about 24 cm in width and 23 cm in length, and the border adds about 4 cm on every side. Divide your mattress top plus the drop you want by 24 to get the number of hearts across, and by 23 to get the number down. For fillers, multiply (hearts across minus 1) by (hearts down minus 1).
The sc3tog pulls the stitches on either side of the dip together, which sharpens the dent between the two lobes. It also gives each side exactly 88 stitches, so the scallops in Rounds 10 and 11 come out symmetrical around the dip.
Hand wash it, or machine wash it inside a large mesh bag on a cool, gentle cycle. Do not tumble dry. Lay it flat to dry, and pin the heart points while it is still damp to keep them crisp.
The finished Lavender Lace Heart Crochet Bedspread Pattern